10:04 a.m.
/On Mon Jul 13 05:03:54 EDT 2009 //Ignacio Diaz-Emparanza wrote:
/
No. I don't have this problem. The importer is working ok in my
system.
I installed gretl in /opt and I have stata_import.so in
/opt/gretl/lib/gretl-gtk2/stata_import.so
If you installed gretl in the default directory and the file is not
in the
correct place, check if you had an error in running 'configure' or
'make'.
Thanks for the attempt, but of course I had run configure, make and make
install when updating the CVS, and everything went fine.
Your reply however suggest me to check folder consistencies. The file
"stata_import.so" is located in
/usr/local/gretl/plugin/.libs/stata_import.so, while the commands import
or open look for it into /usr/local/lib/gretl-gtk2/.
I've copied the file in the folder where "import" and "open" look
for
it, and now everything works. However, I do not think this is the proper
solution. Any idea about the reason of this mismatch ?
Thanks,
Federico
--
Federico Tamagni, PhD
Research Fellow
LEM - Laboratory of Economics and Management
Scuola Superiore Sant'Anna, Pisa, Italy
Phone: (+39)-050-883341
Fax: (+39)-050-883344
email: f.tamagni(a)sssup.it
website: https://mail.sssup.it/~f.tamagni/
2:15 p.m.
New subject: Problem with Stata import
On Mon, 13 Jul 2009, Federico Tamagni wrote:
/On Mon Jul 13 05:03:54 EDT 2009 //Ignacio Diaz-Emparanza wrote:
> No. I don't have this problem. The importer is working ok in my system.
> I installed gretl in /opt and I have stata_import.so in
> /opt/gretl/lib/gretl-gtk2/stata_import.so
> If you installed gretl in the default directory and the file is not in the
> correct place, check if you had an error in running 'configure' or
'make'.
Thanks for the attempt, but of course I had run configure, make and make
install when updating the CVS, and everything went fine.
Your reply however suggest me to check folder consistencies. The file
"stata_import.so" is located in
/usr/local/gretl/plugin/.libs/stata_import.so, while the commands import
or open look for it into /usr/local/lib/gretl-gtk2/.
The file at
/path/to/plugin/.libs/stata_import.so is not supposed to
be the installed version; it's the temporary location used by
libtool. It looks as if your gretl build and gretl installation
are somehow mixed up and the installation of the gretl plugins has
failed.
Please send the "install.log" created by running
make install >install.log 2>&1
in the top-level gretl build directory.
Allin Cottrell
7:08 a.m.
New subject: Problem with Stata import
On Mon, 13 Jul 2009, Allin Cottrell wrote:
The file at /path/to/plugin/.libs/stata_import.so is not supposed to
be the installed version; it's the temporary location used by
libtool. It looks as if your gretl build and gretl installation
are somehow mixed up and the installation of the gretl plugins has
failed.
Please send the "install.log" created by running
make install >install.log 2>&1
in the top-level gretl build directory.
Thanks for reply. I have the install.log file you asked. It's of course
quite long: is it possible to send it as attachment, or should I just
copy&paste the content in a further mail ?
Sorry about this silly question: I'm new to this list, and I'm learning
how it works... :)
Federico
--
Federico Tamagni, PhD
Research Fellow
LEM - Laboratory of Economics and Management
Scuola Superiore Sant'Anna, Pisa, Italy
Phone: (+39)-050-883341
Fax: (+39)-050-883344
email: f.tamagni(a)sssup.it
website: https://mail.sssup.it/~f.tamagni/
7:50 a.m.
New subject: Problem with Stata import
On Tue, 14 Jul 2009, Federico Tamagni wrote:
On Mon, 13 Jul 2009, Allin Cottrell wrote:
> The file at /path/to/plugin/.libs/stata_import.so is not supposed to
> be the installed version; it's the temporary location used by
> libtool. It looks as if your gretl build and gretl installation
> are somehow mixed up and the installation of the gretl plugins has
> failed.
> Please send the "install.log" created by running
> make install >install.log 2>&1
> in the top-level gretl build directory.
Thanks for reply. I have the install.log file you asked. It's of course quite
long: is it possible to send it as attachment, or should I just copy&paste
the content in a further mail ?
An attachment is ok, thanks. You may gzip it if you want.
Sorry about this silly question: I'm new to this list, and
I'm learning how
it works... :)
Why silly? It makes perfect sense.
Riccardo (Jack) Lucchetti
Dipartimento di Economia
Università Politecnica delle Marche
r.lucchetti(a)univpm.it
http://www.econ.univpm.it/lucchetti
9:54 a.m.
New subject: Problem with Stata import
On Tue, 14 July 2009, Riccardo (Jack) Lucchetti wrote:
An attachment is ok, thanks. You may gzip it if you want.
/> Sorry about this silly question: I'm new to this list, and
I'm learning how
/>/> it works... :)
/
Why silly? It makes perfect sense.
Ok, so here is the attachment..hope you find useful to understand what's going on...
--
Federico Tamagni, PhD
Research Fellow
LEM - Laboratory of Economics and Management
Scuola Superiore Sant'Anna, Pisa, Italy
Phone: (+39)-050-883341
Fax: (+39)-050-883344
email: f.tamagni(a)sssup.it
website: https://mail.sssup.it/~f.tamagni/
make -C lib
make[1]: Entering directory `/usr/local/gretl/lib'
make[1]: `libgretl-1.0.la' is up to date.
make[1]: Leaving directory `/usr/local/gretl/lib'
make -C cli
make[1]: Entering directory `/usr/local/gretl/cli'
make[1]: `gretlcli' is up to date.
make[1]: Leaving directory `/usr/local/gretl/cli'
./builddate
build.h is current
make -C gui2
make[1]: Entering directory `/usr/local/gretl/gui2'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/gretl/gui2'
make -C plugin
make[1]: Entering directory `/usr/local/gretl/plugin'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/gretl/plugin'
make -C po
make[1]: Entering directory `/usr/local/gretl/po'
/usr/bin/msgmerge --update cs.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
/usr/bin/msgmerge --update de.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
/usr/bin/msgmerge --update es.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
make[1]: Leaving directory `/usr/local/gretl/po'
make -C share
make[1]: Entering directory `/usr/local/gretl/share'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/gretl/share'
./tools/mkinstalldirs /usr/local/lib /usr/local/bin
./tools/install_man ./tools /usr/local ./gretl.1
Installing ./gretl.1 in /usr/local/man/man1
./tools/install_man ./tools /usr/local ./gretl-config.1
Installing ./gretl-config.1 in /usr/local/man/man1
for d in lib cli gui2 plugin po share ; do make -C $d install; done
make[1]: Entering directory `/usr/local/gretl/lib'
../tools/mkinstalldirs /usr/local/lib /usr/local/include/gretl /usr/local/share/aclocal
/usr/local/lib/pkgconfig
/usr/bin/install -c -m 644 ../gretl.pc /usr/local/lib/pkgconfig
for f in adf_kpss.h bhhh_max.h bootstrap.h boxplots.h calendar.h compare.h compat.h
csvdata.h dataio.h dataset.h dbread.h describe.h discrete.h estimate.h flow_control.h
forecast.h genmain.h genfuncs.h graphing.h gretl_bfgs.h gretl_commands.h gretl_errors.h
gretl_f2c.h gretl_fft.h gretl_foreign.h gretl_func.h gretl_intl.h gretl_list.h
gretl_matrix.h gretl_model.h gretl_panel.h gretl_paths.h gretl_prn.h gretl_restrict.h
gretl_scalar.h gretl_string_table.h gretl_untar.h gretl_utils.h gretl_win32.h gretl_www.h
gretl_xml.h interact.h johansen.h kalman.h libgretl.h libset.h matrix_extra.h missing.h
modelprint.h monte_carlo.h nls.h nonparam.h objstack.h options.h plotspec.h plugins.h
printout.h printscan.h pvalues.h qr_estimate.h random.h strutils.h subsample.h system.h
texprint.h transforms.h tsls.h usermat.h var.h varprint.h vartest.h ; do \
/usr/bin/install -c -m 644 ../lib/src/$f /usr/local/include/gretl ; done
../libtool --mode=install /usr/bin/install -c -m 755 libgretl-1.0.la
/usr/local/lib/libgretl-1.0.la
libtool: install: /usr/bin/install -c -m 755 .libs/libgretl-1.0.so.0.0.52
/usr/local/lib/libgretl-1.0.so.0.0.52
libtool: install: (cd /usr/local/lib && { ln -s -f libgretl-1.0.so.0.0.52
libgretl-1.0.so.0 || { rm -f libgretl-1.0.so.0 && ln -s libgretl-1.0.so.0.0.52
libgretl-1.0.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libgretl-1.0.so.0.0.52
libgretl-1.0.so || { rm -f libgretl-1.0.so && ln -s libgretl-1.0.so.0.0.52
libgretl-1.0.so; }; })
libtool: install: /usr/bin/install -c -m 755 .libs/libgretl-1.0.lai
/usr/local/lib/libgretl-1.0.la
libtool: finish:
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/kde/3.5/sbin:/usr/kde/3.5/bin:/usr/qt/3/bin:/sbin"
ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[1]: Leaving directory `/usr/local/gretl/lib'
make[1]: Entering directory `/usr/local/gretl/cli'
../tools/mkinstalldirs /usr/local/bin
../libtool --mode=install /usr/bin/install -c -m 755 gretlcli /usr/local/bin/gretlcli
libtool: install: /usr/bin/install -c -m 755 .libs/gretlcli /usr/local/bin/gretlcli
make[1]: Leaving directory `/usr/local/gretl/cli'
make[1]: Entering directory `/usr/local/gretl/gui2'
../tools/mkinstalldirs /usr/local/bin
../tools/mkinstalldirs /usr/local/share/gretl
../tools/mkinstalldirs /usr/share/gtksourceview-2.0/language-specs
../tools/mkinstalldirs /usr/local/share/gretl/ui
../libtool --mode=install /usr/bin/install -c -m 755 gretl_x11 /usr/local/bin/gretl_x11
libtool: install: /usr/bin/install -c -m 755 .libs/gretl_x11 /usr/local/bin/gretl_x11
/usr/bin/install -c -m 644 ../gui2/gretlmain.xml /usr/local/share/gretl/ui
/usr/bin/install -c -m 755 ../gretl_sh /usr/local/bin/gretl
/usr/bin/install -c -m 644 ../pixmaps/gretl-logo.xpm /usr/local/share/gretl
/usr/bin/install -c -m 644 ../COPYING /usr/local/share/gretl
/usr/bin/install -c -m 644 gretl.lang.2
/usr/share/gtksourceview-2.0/language-specs/gretl.lang
/usr/bin/install -c -m 644 ../gui2/gnuplot.lang.2
/usr/share/gtksourceview-2.0/language-specs/gnuplot.lang
make[1]: Leaving directory `/usr/local/gretl/gui2'
make[1]: Entering directory `/usr/local/gretl/plugin'
../tools/mkinstalldirs /usr/local/lib/gretl-gtk2
../tools/mkinstalldirs /usr/local/lib/gretl-gtk2/data
../libtool --mode=install /usr/bin/install -c -m 755 \
arbond.la arma.la arma_x12.la eviews_import.la stata_import.la spss_import.la
jmulti_import.la fractals.la garch.la johansen.la kernel.la lad.la nistcheck.la
range-mean.la stats_tables.la sysest.la tobit.la oprobit.la urcdist.la vif.la poisson.la
gretlzip.la heckit.la quantreg.la interval.la anova.la excel_import.la gnumeric_import.la
ods_import.la progress_bar.la leverage.la tramo-x12a.la pca.la mailer.la mp_ols.la
/usr/local/lib/gretl-gtk2
libtool: install: warning: relinking `arbond.la'
libtool: install: (cd /usr/local/gretl/plugin; /bin/sh /usr/local/gretl/libtool
--mode=relink gcc -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o arbond.la
arbond.lo ../lib/libgretl-1.0.la )
libtool: relink: warning: `/usr/lib/libxml2.la' seems to be moved
libtool: relink: warning: `/usr/lib/libglib-2.0.la' seems to be moved
libtool: relink: warning: `/usr/lib/libgmp.la' seems to be moved
libtool: relink: warning: `/usr/lib/libfftw3.la' seems to be moved
libtool: relink: gcc -shared .libs/arbond.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib
-L/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2 -llapack -lblas -lgfortran -L/usr/lib64 -lxml2
-ldl -lz -lglib-2.0 -lgmp -lfftw3 -lm -Wl,-soname -Wl,arbond.so -o .libs/arbond.so
/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/../../../../x86_64-pc-linux-gnu/bin/ld:
/usr/local/lib/libfftw3.a(plan-dft-c2r-1d.o): relocation R_X86_64_32 against `a local
symbol' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libfftw3.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
libtool: install: error: relink `arbond.la' with the above command before installing
it
make[1]: *** [install] Error 1
make[1]: Leaving directory `/usr/local/gretl/plugin'
make[1]: Entering directory `/usr/local/gretl/po'
/usr/bin/msgmerge --update cs.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
/usr/bin/msgmerge --update de.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
/usr/bin/msgmerge --update es.po gretl.pot
....................................................................................................................................................................................................................................................................................................................................
done.
../tools/mkinstalldirs /usr/local/share
installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/gretl.mo
installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/gretl.mo
installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/gretl.mo
installing eu.gmo as /usr/local/share/locale/eu/LC_MESSAGES/gretl.mo
installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/gretl.mo
installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/gretl.mo
installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/gretl.mo
installing tr.gmo as /usr/local/share/locale/tr/LC_MESSAGES/gretl.mo
installing pt.gmo as /usr/local/share/locale/pt/LC_MESSAGES/gretl.mo
installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/gretl.mo
installing ru.gmo as /usr/local/share/locale/ru/LC_MESSAGES/gretl.mo
installing zh_TW.gmo as /usr/local/share/locale/zh_TW/LC_MESSAGES/gretl.mo
if test "gretl" = "gettext"; then \
../tools/mkinstalldirs /usr/local/share/gettext/po; \
for file in Makefile.in.in Makevars remove-potcdate.sin ; do \
/usr/bin/install -c -m 644 ./$file \
/usr/local/share/gettext/po/$file; \
done; \
else \
: ; \
fi
make[1]: Leaving directory `/usr/local/gretl/po'
make[1]: Entering directory `/usr/local/gretl/share'
../tools/mkinstalldirs /usr/local/share/gretl
../tools/mkinstalldirs /usr/local/share/gretl/data
../tools/mkinstalldirs /usr/local/share/gretl/data/greene
../tools/mkinstalldirs /usr/local/share/gretl/data/misc
../tools/mkinstalldirs /usr/local/share/gretl/data/nist
../tools/mkinstalldirs /usr/local/share/gretl/scripts
../tools/mkinstalldirs /usr/local/share/gretl/scripts/misc
../tools/mkinstalldirs /usr/local/share/gretl/db
../tools/mkinstalldirs /usr/local/share/gretl/functions
../tools/mkinstalldirs /usr/local/share/gretl/fonts
for f in ../share/data/*.gdt ; do \
cp -fp $f /usr/local/share/gretl/data ; done
cp -fp ../share/data/descriptions /usr/local/share/gretl/data
cp -fp ../share/data/gretldata.dtd /usr/local/share/gretl/data
for f in ../share/data/greene/* ; do \
cp -fp $f /usr/local/share/gretl/data/greene ; done
cp: omitting directory `../share/data/greene/CVS'
for f in ../share/data/misc/* ; do \
cp -fp $f /usr/local/share/gretl/data/misc ; done
cp: omitting directory `../share/data/misc/CVS'
for f in ../tests/*.dat ; do \
cp -fp $f /usr/local/share/gretl/data/nist ; done
for f in ../share/scripts/* ; do \
cp -fp $f /usr/local/share/gretl/scripts ; done
cp: omitting directory `../share/scripts/CVS'
cp: omitting directory `../share/scripts/misc'
for f in ../share/scripts/misc/* ; do \
cp -fp $f /usr/local/share/gretl/scripts/misc ; done
cp: omitting directory `../share/scripts/misc/CVS'
cp -fp ../share/functions/gretlfunc.dtd /usr/local/share/gretl/functions
for f in ../share/fonts/*.ttf ; do \
cp -fp $f /usr/local/share/gretl/fonts ; done
../tools/mkinstalldirs /usr/local/share/gretl
../tools/mkinstalldirs /usr/local/share/gretl/doc
../tools/mkinstalldirs /usr/local/share/gretl/helpfigs
for f in gretlgui.hlp gretlcmd.hlp gretlcli.hlp gretlgui.hlp.es gretlcmd.hlp.es
gretlcli.hlp.es gretlgui.hlp.it gretlcmd.hlp.it gretlcli.hlp.it gretlgui.hlp.pt
gretlcmd.hlp.pt gretlcli.hlp.pt genrcli.hlp genrgui.hlp genrcli.hlp.it genrgui.hlp.it
genrcli.hlp.pt genrgui.hlp.pt ; do \
if test -f ../share/$f ; then \
cp -fp ../share/$f /usr/local/share/gretl ; fi ; done
for f in ../share/texfigs/*.png ; do \
cp -fp $f /usr/local/share/gretl/helpfigs ; done
for f in ../doc/tex/gretl-ref.pdf ../doc/tex/gretl-guide.pdf ; do \
if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done
for f in ../doc/tex/gretl-ref-a4.pdf ../doc/tex/gretl-guide-a4.pdf ; do \
if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done
cp -fp ../share/gretl.stamp /usr/local/share/gretl/gretl.stamp
make -C bcih install
make[2]: Entering directory `/usr/local/gretl/share/bcih'
cp -fp fedstl.bin /usr/local/share/gretl/db/fedstl.bin
cp -fp ../../share/bcih/fedstl.idx /usr/local/share/gretl/db/fedstl.idx
make[2]: Leaving directory `/usr/local/gretl/share/bcih'
make[1]: Leaving directory `/usr/local/gretl/share'
make -C share install
make[1]: Entering directory `/usr/local/gretl/share'
../tools/mkinstalldirs /usr/local/share/gretl
../tools/mkinstalldirs /usr/local/share/gretl/data
../tools/mkinstalldirs /usr/local/share/gretl/data/greene
../tools/mkinstalldirs /usr/local/share/gretl/data/misc
../tools/mkinstalldirs /usr/local/share/gretl/data/nist
../tools/mkinstalldirs /usr/local/share/gretl/scripts
../tools/mkinstalldirs /usr/local/share/gretl/scripts/misc
../tools/mkinstalldirs /usr/local/share/gretl/db
../tools/mkinstalldirs /usr/local/share/gretl/functions
../tools/mkinstalldirs /usr/local/share/gretl/fonts
for f in ../share/data/*.gdt ; do \
cp -fp $f /usr/local/share/gretl/data ; done
cp -fp ../share/data/descriptions /usr/local/share/gretl/data
cp -fp ../share/data/gretldata.dtd /usr/local/share/gretl/data
for f in ../share/data/greene/* ; do \
cp -fp $f /usr/local/share/gretl/data/greene ; done
cp: omitting directory `../share/data/greene/CVS'
for f in ../share/data/misc/* ; do \
cp -fp $f /usr/local/share/gretl/data/misc ; done
cp: omitting directory `../share/data/misc/CVS'
for f in ../tests/*.dat ; do \
cp -fp $f /usr/local/share/gretl/data/nist ; done
for f in ../share/scripts/* ; do \
cp -fp $f /usr/local/share/gretl/scripts ; done
cp: omitting directory `../share/scripts/CVS'
cp: omitting directory `../share/scripts/misc'
for f in ../share/scripts/misc/* ; do \
cp -fp $f /usr/local/share/gretl/scripts/misc ; done
cp: omitting directory `../share/scripts/misc/CVS'
cp -fp ../share/functions/gretlfunc.dtd /usr/local/share/gretl/functions
for f in ../share/fonts/*.ttf ; do \
cp -fp $f /usr/local/share/gretl/fonts ; done
../tools/mkinstalldirs /usr/local/share/gretl
../tools/mkinstalldirs /usr/local/share/gretl/doc
../tools/mkinstalldirs /usr/local/share/gretl/helpfigs
for f in gretlgui.hlp gretlcmd.hlp gretlcli.hlp gretlgui.hlp.es gretlcmd.hlp.es
gretlcli.hlp.es gretlgui.hlp.it gretlcmd.hlp.it gretlcli.hlp.it gretlgui.hlp.pt
gretlcmd.hlp.pt gretlcli.hlp.pt genrcli.hlp genrgui.hlp genrcli.hlp.it genrgui.hlp.it
genrcli.hlp.pt genrgui.hlp.pt ; do \
if test -f ../share/$f ; then \
cp -fp ../share/$f /usr/local/share/gretl ; fi ; done
for f in ../share/texfigs/*.png ; do \
cp -fp $f /usr/local/share/gretl/helpfigs ; done
for f in ../doc/tex/gretl-ref.pdf ../doc/tex/gretl-guide.pdf ; do \
if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done
for f in ../doc/tex/gretl-ref-a4.pdf ../doc/tex/gretl-guide-a4.pdf ; do \
if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done
cp -fp ../share/gretl.stamp /usr/local/share/gretl/gretl.stamp
make -C bcih install
make[2]: Entering directory `/usr/local/gretl/share/bcih'
cp -fp fedstl.bin /usr/local/share/gretl/db/fedstl.bin
cp -fp ../../share/bcih/fedstl.idx /usr/local/share/gretl/db/fedstl.idx
make[2]: Leaving directory `/usr/local/gretl/share/bcih'
make[1]: Leaving directory `/usr/local/gretl/share'
10:28 a.m.
New subject: Problem with Stata import
On Tue, 14 Jul 2009, Federico Tamagni wrote:
Ok, so here is the attachment..hope you find useful to understand
what's
going on...
Before Allin gives his take, two things:
1) where do you keep your source tree? It looks as if you're running make
from /usr/local/gretl/, which is definitely not what I'd recommend.
2) it looks as if you've got a 32bit/64bit mismatch with your version of
fftw3 (see line 99).
Riccardo (Jack) Lucchetti
Dipartimento di Economia
Università Politecnica delle Marche
r.lucchetti(a)univpm.it
http://www.econ.univpm.it/lucchetti
12:32 p.m.
New subject: Problem with Stata import
On Tue, 14 Jul 2009, Riccardo (Jack) Lucchetti wrote:
On Tue, 14 Jul 2009, Federico Tamagni wrote:
> Ok, so here is the attachment..hope you find useful to understand what's
> going on...
Yes, thanks very much.
Before Allin gives his take, two things:
1) where do you keep your source tree? It looks as if you're running make
from /usr/local/gretl/, which is definitely not what I'd recommend.
I agree with Jack. If the source tree and the installation tree
overlap this may cause problems. The usual approach when
compiling things from source is to root the build tree somewhere
different altogether, say in /usr/src if you're building the
software as the root user, or somewhere under your home directory
if you're building as an ordinary user (in which case you'd
probably do "sudo make install" to install).
2) it looks as if you've got a 32bit/64bit mismatch with your
version of fftw3 (see line 99).
Yes, that's the show-stopper: arbond.so is the first gretl plugin
to be installed, and this is failing because of a problem with
libfftw3.a. This aborts the "make install" in the plugin
directory, so all the plugins will be missing. The relevant lines
from your install.log are as follows.
1. Libtool calls the linker:
libtool: relink: gcc -shared .libs/arbond.o [...] \
-lfftw3 -lm -Wl,-soname -Wl,arbond.so -o .libs/arbond.so
2. The linker responds:
[...] x86_64-pc-linux-gnu/bin/ld:
/usr/local/lib/libfftw3.a(plan-dft-c2r-1d.o): relocation
R_X86_64_32 against `a local symbol' can not be used when making a
shared object; recompile with -fPIC
I believe the problem here is with linking to a static libfftw3.
You should probably try building and installing the dynamic
library libfftw3.so. Note that when building fftw3 from the
source package, for some reason a purely static build is the
default; to get a shared library you have to explicitly say
./configure --enable-shared
Hope this helps.
Allin Cottrell
5640
days inactive
5641
days old
6 comments
3 participants
participants (3)
-
Allin Cottrell -
Federico Tamagni -
Riccardo (Jack) Lucchetti