On Sat, 24 Oct 2015, Clive Nicholas wrote: Thanks for the thorough report, Clive. The trouble is here: The thing is that --enable-build-doc is a valid option only when you're building from the git (or CVS, as was) sources. With a regular release source package such as gretl-2015d.tar.xz the "doc" material is included in its "built" form and there's no facility for building it from scratch. If you run "./configure --help" one of the messages that zip by is <quote> --enable-build-doc Enable building of gretl docs [git only] </quote> However, we should rejig this so that it produces a more informative error message in the case you're describing (release source used, but --enable-build-doc option given). Allin Cottrell

Allin, Corrected -configure- command, plus all the other code, ran as expected. My -gretl- was successfully installed and updated via -git-. -make pdfdocs-, however, came back with errors and -make -j3-, as suggested by Jack, came back with: Output written on gretl-ref.pdf (162 pages, 931768 bytes). Transcript written on gretl-ref.log. Makefile:103: recipe for target 'gretl-ref.pdf' failed make[3]: *** [gretl-ref.pdf] Error 1 make[3]: Leaving directory '/home/clive/gretl-git/doc/tex' Makefile:213: recipe for target '../tex/gretl-ref.bbl' failed make[2]: *** [../tex/gretl-ref.bbl] Error 2 make[2]: Leaving directory '/home/clive/gretl-git/doc/commands' Makefile:48: recipe for target 'help' failed make[1]: *** [help] Error 2 make[1]: Leaving directory '/home/clive/gretl-git/share' Makefile:65: recipe for target 'share' failed make: *** [share] Error 2 Thoughts? C On 24 October 2015 at 19:14, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, Hmmm, curious. Might need to play about with -sudo tlmgr- and see what's up... C On 24 October 2015 at 21:42, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, Okay, so what should I do in order the build the docs? C On 24 October 2015 at 22:17, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, After updating -gretl- from my gretl-git folder successfully: clive@clivubu:~/gretl-git$ sudo git pull [sudo] password for clive: Password: remote: Counting objects: 8, done. remote: Compressing objects: 100% (6/6), done. remote: Total 6 (delta 4), reused 0 (delta 0) Unpacking objects: 100% (6/6), done. 16a9a67..9d06a40 master -> origin/master Updating 16a9a67..9d06a40 Fast-forward Makefile.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) it then went downhill, switching to my -gretl-2015d- folder: clive@clivubu:~/gretl-2015d$ make -j3 ./builddate make -C po make -C xdg build.h is current make -C lib make[1]: Entering directory '/home/clive/gretl-2015d/xdg' make[1]: Nothing to be done for 'all'. make[1]: Entering directory '/home/clive/gretl-2015d/po' make[1]: Leaving directory '/home/clive/gretl-2015d/xdg' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/po' make[1]: Entering directory '/home/clive/gretl-2015d/lib' make[1]: 'libgretl-1.0.la' is up to date. make[1]: Leaving directory '/home/clive/gretl-2015d/lib' make -C cli make -C gui2 make -C plugin make[1]: Entering directory '/home/clive/gretl-2015d/cli' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/cli' make -C share make[1]: Entering directory '/home/clive/gretl-2015d/share' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/share' make[1]: Entering directory '/home/clive/gretl-2015d/plugin' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/plugin' make[1]: Entering directory '/home/clive/gretl-2015d/gui2' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/gui2' clive@clivubu:~/gretl-2015d$ make pdfdocs make -C make: option requires an argument -- 'C' Usage: make [options] [target] ... Options: -b, -m Ignored for compatibility. -B, --always-make Unconditionally make all targets. -C DIRECTORY, --directory=DIRECTORY Change to DIRECTORY before doing anything. -d Print lots of debugging information. --debug[=FLAGS] Print various types of debugging information. -e, --environment-overrides Environment variables override makefiles. --eval=STRING Evaluate STRING as a makefile statement. -f FILE, --file=FILE, --makefile=FILE Read FILE as a makefile. -h, --help Print this message and exit. -i, --ignore-errors Ignore errors from recipes. -I DIRECTORY, --include-dir=DIRECTORY Search DIRECTORY for included makefiles. -j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg. -k, --keep-going Keep going when some targets can't be made. -l [N], --load-average[=N], --max-load[=N] Don't start multiple jobs unless load is below N. -L, --check-symlink-times Use the latest mtime between symlinks and target. -n, --just-print, --dry-run, --recon Don't actually run any recipe; just print them. -o FILE, --old-file=FILE, --assume-old=FILE Consider FILE to be very old and don't remake it. -O[TYPE], --output-sync[=TYPE] Synchronize output of parallel jobs by TYPE. -p, --print-data-base Print make's internal database. -q, --question Run no recipe; exit status says if up to date. -r, --no-builtin-rules Disable the built-in implicit rules. -R, --no-builtin-variables Disable the built-in variable settings. -s, --silent, --quiet Don't echo recipes. -S, --no-keep-going, --stop Turns off -k. -t, --touch Touch targets instead of remaking them. --trace Print tracing information. -v, --version Print the version number of make and exit. -w, --print-directory Print the current directory. --no-print-directory Turn off -w, even if it was turned on implicitly. -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE Consider FILE to be infinitely new. --warn-undefined-variables Warn when an undefined variable is referenced. This program built for x86_64-pc-linux-gnu Report bugs to <bug-make(a)gnu.org&gt; Makefile:68: recipe for target 'pdfdocs' failed make: *** [pdfdocs] Error 2 No mention of BibTeX there, however, C On 24 October 2015 at 22:45, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, Sorry for the delay in response: the weekend took over! See my code and (very long) output below: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ clive@clivubu:~/gretl-git$ sudo ./configure --prefix=/usr/local --enable-quiet-build --enable-openmp --enable-build-doc [sudo] password for clive: configuring for gretl 2015e-git (library version 15.0.0) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking whether make sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c checking for a thread-safe mkdir -p... /bin/mkdir -p checking for a sed that does not truncate output... /bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc 2015e-git checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... no checking for mawk... mawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether ln -s works... yes checking for sin in -lm... yes checking for fopen in -lc... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking fnmatch.h usability... yes checking fnmatch.h presence... yes checking for fnmatch.h... yes checking fenv.h usability... yes checking fenv.h presence... yes checking for fenv.h... yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking libproc.h usability... no checking libproc.h presence... no checking for libproc.h... no checking sys/proc_info.h usability... no checking sys/proc_info.h presence... no checking for sys/proc_info.h... no checking for an ANSI C-conforming const... yes checking for long double with more range or precision than double... yes checking for vasprintf... yes checking for posix_memalign... yes checking size of int... 4 checking return type of signal handlers... void checking whether byte ordering is bigendian... no checking whether to use SSE2... yes checking whether to use AVX... yes checking whether to use OpenMP... yes checking immintrin.h usability... yes checking immintrin.h presence... yes checking for immintrin.h... yes checking for mpicc... no checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for struct sockaddr_in... yes checking for struct in_addr... yes checking readline/readline.h usability... yes checking readline/readline.h presence... yes checking for readline/readline.h... yes checking for tgetent in -lncurses... yes checking for readline in -lreadline... yes checking for rl_completion_matches in -lreadline... yes checking for xdg-mime... yes checking for mmap... yes checking for gzopen in -lz... yes checking for GMP - version >= 4.0.1... yes checking for MPFR - version >= 2.2.0... yes checking for libgfortran... checking for _gfortran_abort in -lgfortran... yes checking for LAPACK... yes checking for dgejsv_ in -llapack... yes checking for gnuplot... yes checking for gnuplot >= 4.6.0 with cairo support... yes checking for pdflatex... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for FFTW... yes checking for CURL... yes checking for GLIB... yes checking for GLIB28... yes checking for JSON_GLIB... yes checking for GTK3... no GTK 3 >= 3.0.1 not found checking for GTK2... yes checking for GTKSPINNER... yes checking for GTKSOURCEVIEW... yes checking for GDK_PIXBUF... yes checking for XML... yes checking for XSLT... yes checking for RLIB... yes checking whether CC supports -Wno-deprecated-declarations... yes configure: creating ./config.status config.status: creating Makefile config.status: creating gretl_sh config.status: creating gretl.pc config.status: creating gui2/Makefile config.status: creating gui2/debug config.status: creating xdg/gretl.desktop config.status: creating xdg/Makefile config.status: creating cli/Makefile config.status: creating cli/debug config.status: creating lib/Makefile config.status: creating plugin/Makefile config.status: creating po/Makefile.in config.status: creating share/Makefile config.status: creating share/bcih/Makefile config.status: creating tests/Makefile config.status: creating extra/Makefile config.status: creating osx/Makefile config.status: creating osx/gretl.sh config.status: creating osx/fixlinks.sh config.status: creating osx/Info.plist config.status: creating redhat/gretl.spec config.status: creating utils/emacs/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing libtool commands configure: creating ./config.status config.status: creating Makefile config.status: creating gretl_sh config.status: creating gretl.pc config.status: creating gui2/Makefile config.status: creating gui2/debug config.status: creating xdg/gretl.desktop config.status: creating xdg/Makefile config.status: creating cli/Makefile config.status: creating cli/debug config.status: creating lib/Makefile config.status: creating plugin/Makefile config.status: creating po/Makefile.in config.status: creating share/Makefile config.status: creating share/bcih/Makefile config.status: creating tests/Makefile config.status: creating extra/Makefile config.status: creating osx/Makefile config.status: creating osx/gretl.sh config.status: creating osx/fixlinks.sh config.status: creating osx/Info.plist config.status: creating redhat/gretl.spec config.status: creating utils/emacs/Makefile config.status: creating doc/Makefile config.status: creating doc/commands/Makefile config.status: creating doc/tex/Makefile config.status: creating doc/tex_it/Makefile config.status: creating doc/tex_es/Makefile config.status: creating doc/tex_pt/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing libtool commands configure: creating ./config.status config.status: creating Makefile config.status: creating gretl_sh config.status: creating gretl.pc config.status: creating gui2/Makefile config.status: creating gui2/debug config.status: creating xdg/gretl.desktop config.status: creating xdg/Makefile config.status: creating cli/Makefile config.status: creating cli/debug config.status: creating lib/Makefile config.status: creating plugin/Makefile config.status: creating po/Makefile.in config.status: creating share/Makefile config.status: creating share/bcih/Makefile config.status: creating tests/Makefile config.status: creating extra/Makefile config.status: creating osx/Makefile config.status: creating osx/gretl.sh config.status: creating osx/fixlinks.sh config.status: creating osx/Info.plist config.status: creating redhat/gretl.spec config.status: creating utils/emacs/Makefile config.status: creating doc/Makefile config.status: creating doc/commands/Makefile config.status: creating doc/tex/Makefile config.status: creating doc/tex_it/Makefile config.status: creating doc/tex_es/Makefile config.status: creating doc/tex_pt/Makefile config.status: creating doc/gretl.sty config.status: creating doc/gretl-lite.sty config.status: creating config.h config.status: config.h is unchanged config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing libtool commands Configuration: Installation path: /usr/local Use readline library: yes Use gnuplot for graphs: yes Use pdflatex for typesetting: yes Use libgsf for zip/unzip: no MPFR support: yes sse2 support for RNG: yes OpenMP support: yes MPI support: no AVX support for arithmetic: yes Build with GTK version: 2.0 Build gretl documentation: yes Use Lucida fonts: no Build message catalogs: yes Build gretl addons: no X-12-ARIMA support: yes TRAMO/SEATS support: yes libR support: yes ODBC support: no JSON parsing support: yes Experimental audio support: no Use xdg-utils in installation: if DESTDIR not set LAPACK libraries: -llapack -lblas -lgfortran Now type 'make' to build gretl. You can also do 'make pdfdocs' to build the PDF documentation. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Then: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ clive@clivubu:~/gretl-git$ make ./builddate Can't write to build.h Makefile:103: recipe for target 'buildstamp' failed make: *** [buildstamp] Error 1 clive@clivubu:~/gretl-git$ make -j3 ./builddate make -C po Can't write to build.h make -C xdg Makefile:103: recipe for target 'buildstamp' failed make: *** [buildstamp] Error 1 make: *** Waiting for unfinished jobs.... make[1]: Entering directory '/home/clive/gretl-git/po' make[1]: Entering directory '/home/clive/gretl-git/xdg' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-git/xdg' /usr/bin/msgmerge --update bg.po gretl.pot /usr/bin/msgmerge --update ca.po gretl.pot /usr/bin/msgmerge --update cs.po gretl.pot ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... done. done. done. /usr/bin/msgmerge --update el.po gretl.pot /usr/bin/msgmerge --update de.po gretl.pot /usr/bin/msgmerge --update es.po gretl.pot ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... done. done. done. /usr/bin/msgmerge --update eu.po gretl.pot /usr/bin/msgmerge --update fr.po gretl.pot /usr/bin/msgmerge --update gl.po gretl.pot ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. done. .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. done. done. make[1]: Leaving directory '/home/clive/gretl-git/po' ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Then: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ clive@clivubu:~/gretl-2015d$ sudo make install ./builddate build.h is current make -C lib make[1]: Entering directory '/home/clive/gretl-2015d/lib' make[1]: 'libgretl-1.0.la' is up to date. make[1]: Leaving directory '/home/clive/gretl-2015d/lib' make -C cli make[1]: Entering directory '/home/clive/gretl-2015d/cli' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/cli' make -C gui2 make[1]: Entering directory '/home/clive/gretl-2015d/gui2' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/gui2' make -C plugin make[1]: Entering directory '/home/clive/gretl-2015d/plugin' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/plugin' make -C po make[1]: Entering directory '/home/clive/gretl-2015d/po' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/po' make -C share make[1]: Entering directory '/home/clive/gretl-2015d/share' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/share' make -C xdg make[1]: Entering directory '/home/clive/gretl-2015d/xdg' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/xdg' ./tools/mkinstalldirs /usr/local/lib /usr/local/bin ./tools/install_man ./tools /usr/local ./gretl.1 Installing ./gretl.1 in /usr/local/man/man1 for d in lib cli gui2 plugin po share xdg ; do make -C $d install; done make[1]: Entering directory '/home/clive/gretl-2015d/lib' ../tools/mkinstalldirs /usr/local/lib /usr/local/include/gretl /usr/local/lib/pkgconfig /usr/bin/install -c -m 644 ../gretl.pc /usr/local/lib/pkgconfig for f in adf_kpss.h bhhh_max.h bootstrap.h boxplots.h calendar.h compare.h compat.h dataio.h dataset.h dbread.h describe.h discrete.h estimate.h forecast.h genmain.h genfuncs.h graphing.h gretl_array.h gretl_bfgs.h gretl_bundle.h gretl_commands.h gretl_data_io.h gretl_errors.h gretl_f2c.h gretl_fft.h gretl_foreign.h gretl_func.h gretl_intl.h gretl_list.h gretl_matrix.h gretl_model.h gretl_normal.h gretl_panel.h gretl_paths.h gretl_prn.h gretl_restrict.h gretl_string_table.h gretl_untar.h gretl_utils.h gretl_win32.h gretl_xml.h gretl_zip.h interact.h johansen.h kalman.h libgretl.h libset.h matrix_extra.h missing.h modelprint.h monte_carlo.h nls.h nonparam.h objstack.h options.h plotspec.h plugins.h printout.h printscan.h pvalues.h qr_estimate.h random.h strutils.h subsample.h system.h texprint.h transforms.h tsls.h usermat.h uservar.h var.h varprint.h vartest.h gretl_www.h ; do \ /usr/bin/install -c -m 644 ../lib/src/$f /usr/local/include/gretl ; done ../libtool --mode=install /usr/bin/install -c -m 755 libgretl-1.0.la /usr/local/lib/libgretl-1.0.la libtool: install: /usr/bin/install -c -m 755 .libs/libgretl-1.0.so.15.0.0 /usr/local/lib/libgretl-1.0.so.15.0.0 libtool: install: (cd /usr/local/lib && { ln -s -f libgretl-1.0.so.15.0.0 libgretl-1.0.so.15 || { rm -f libgretl-1.0.so.15 && ln -s libgretl-1.0.so.15.0.0 libgretl-1.0.so.15; }; }) libtool: install: (cd /usr/local/lib && { ln -s -f libgretl-1.0.so.15.0.0 libgretl-1.0.so || { rm -f libgretl-1.0.so && ln -s libgretl-1.0.so.15.0.0 libgretl-1.0.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libgretl-1.0.lai /usr/local/lib/libgretl-1.0.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[1]: Leaving directory '/home/clive/gretl-2015d/lib' make[1]: Entering directory '/home/clive/gretl-2015d/cli' ../tools/mkinstalldirs /usr/local/bin ../libtool --mode=install /usr/bin/install -c -m 755 gretlcli /usr/local/bin/gretlcli libtool: install: /usr/bin/install -c -m 755 .libs/gretlcli /usr/local/bin/gretlcli make[1]: Leaving directory '/home/clive/gretl-2015d/cli' make[1]: Entering directory '/home/clive/gretl-2015d/gui2' ../tools/mkinstalldirs /usr/local/bin ../tools/mkinstalldirs /usr/local/share/appdata ../tools/mkinstalldirs /usr/local/share/gretl ../tools/mkinstalldirs /usr/share/gtksourceview-2.0/language-specs ../tools/mkinstalldirs /usr/local/share/gretl/ui ../libtool --mode=install /usr/bin/install -c -m 755 gretl_x11 /usr/local/bin/gretl_x11 libtool: install: /usr/bin/install -c -m 755 .libs/gretl_x11 /usr/local/bin/gretl_x11 /usr/bin/install -c -m 644 ../gui2/gretlmain.xml /usr/local/share/gretl/ui /usr/bin/install -c -m 644 ../gui2/gretlmodel.xml /usr/local/share/gretl/ui /usr/bin/install -c -m 755 ../gretl_sh /usr/local/bin/gretl /usr/bin/install -c -m 644 ../pixmaps/gretl-logo.xpm /usr/local/share/gretl /usr/bin/install -c -m 644 ../gretl.appdata.xml /usr/local/share/appdata /usr/bin/install -c -m 644 gretl.lang /usr/share/gtksourceview-2.0/language-specs/gretl.lang /usr/bin/install -c -m 644 ../gui2/gnuplot.lang /usr/share/gtksourceview-2.0/language-specs/gnuplot.lang /usr/bin/install -c -m 644 ../gui2/stata.lang /usr/share/gtksourceview-2.0/language-specs/stata.lang /usr/bin/install -c -m 644 ../gui2/gfnspec.lang /usr/share/gtksourceview-2.0/language-specs/gfnspec.lang /usr/bin/install -c -m 644 NEWS /usr/local/share/gretl make[1]: Leaving directory '/home/clive/gretl-2015d/gui2' make[1]: Entering directory '/home/clive/gretl-2015d/plugin' ../tools/mkinstalldirs /usr/local/lib/gretl-gtk2 ../tools/mkinstalldirs /usr/local/lib/gretl-gtk2/data ../libtool --mode=install /usr/bin/install -c -m 755 \ arbond.la arma.la arma_x12.la eviews_import.la stata_import.la spss_import.la sas_import.la jmulti_import.la fractals.la garch.la johansen.la kernel.la nistcheck.la range-mean.la stats_tables.la sysest.la urcdist.la vif.la poisson.la duration.la heckit.la quantreg.la interval.la anova.la mp_ols.la interpolate.la biprobit.la reprobit.la panurc.la arma_x12.la excel_import.la xlsx_import.la gnumeric_import.la leverage.la mailer.la ods_import.la pca.la progress_bar.la tramo-x12a.la mailer.la gretlzip.la json_get.la /usr/local/lib/gretl-gtk2 libtool: warning: relinking 'arbond.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o arbond.la arbond.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/arbond.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,arbond.so -o .libs/arbond.so libtool: install: /usr/bin/install -c -m 755 .libs/arbond.soT /usr/local/lib/gretl-gtk2/arbond.so libtool: install: /usr/bin/install -c -m 755 .libs/arbond.lai /usr/local/lib/gretl-gtk2/arbond.la libtool: warning: relinking 'arma.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o arma.la arma.lo arma_cml.lo arma_init.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/arma.o .libs/arma_cml.o .libs/arma_init.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,arma.so -o .libs/arma.so libtool: install: /usr/bin/install -c -m 755 .libs/arma.soT /usr/local/lib/gretl-gtk2/arma.so libtool: install: /usr/bin/install -c -m 755 .libs/arma.lai /usr/local/lib/gretl-gtk2/arma.la libtool: warning: relinking 'arma_x12.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o arma_x12.la arma_x12.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/arma_x12.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,arma_x12.so -o .libs/arma_x12.so libtool: install: /usr/bin/install -c -m 755 .libs/arma_x12.soT /usr/local/lib/gretl-gtk2/arma_x12.so libtool: install: /usr/bin/install -c -m 755 .libs/arma_x12.lai /usr/local/lib/gretl-gtk2/arma_x12.la libtool: warning: relinking 'eviews_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o eviews_import.la eviews_import.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/eviews_import.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,eviews_import.so -o .libs/eviews_import.so libtool: install: /usr/bin/install -c -m 755 .libs/eviews_import.soT /usr/local/lib/gretl-gtk2/eviews_import.so libtool: install: /usr/bin/install -c -m 755 .libs/eviews_import.lai /usr/local/lib/gretl-gtk2/eviews_import.la libtool: warning: relinking 'stata_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o stata_import.la stata_import.lo ../lib/libgretl-1.0.la -lglib-2.0 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/stata_import.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lgmp -lfftw3 -lcurl -lglib-2.0 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,stata_import.so -o .libs/stata_import.so libtool: install: /usr/bin/install -c -m 755 .libs/stata_import.soT /usr/local/lib/gretl-gtk2/stata_import.so libtool: install: /usr/bin/install -c -m 755 .libs/stata_import.lai /usr/local/lib/gretl-gtk2/stata_import.la libtool: warning: relinking 'spss_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o spss_import.la spss_import.lo ../lib/libgretl-1.0.la -lglib-2.0 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/spss_import.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lgmp -lfftw3 -lcurl -lglib-2.0 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,spss_import.so -o .libs/spss_import.so libtool: install: /usr/bin/install -c -m 755 .libs/spss_import.soT /usr/local/lib/gretl-gtk2/spss_import.so libtool: install: /usr/bin/install -c -m 755 .libs/spss_import.lai /usr/local/lib/gretl-gtk2/spss_import.la libtool: warning: relinking 'sas_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o sas_import.la sas_import.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/sas_import.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,sas_import.so -o .libs/sas_import.so libtool: install: /usr/bin/install -c -m 755 .libs/sas_import.soT /usr/local/lib/gretl-gtk2/sas_import.so libtool: install: /usr/bin/install -c -m 755 .libs/sas_import.lai /usr/local/lib/gretl-gtk2/sas_import.la libtool: warning: relinking 'jmulti_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o jmulti_import.la jmulti_import.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/jmulti_import.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,jmulti_import.so -o .libs/jmulti_import.so libtool: install: /usr/bin/install -c -m 755 .libs/jmulti_import.soT /usr/local/lib/gretl-gtk2/jmulti_import.so libtool: install: /usr/bin/install -c -m 755 .libs/jmulti_import.lai /usr/local/lib/gretl-gtk2/jmulti_import.la libtool: warning: relinking 'fractals.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o fractals.la fractals.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/fractals.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,fractals.so -o .libs/fractals.so libtool: install: /usr/bin/install -c -m 755 .libs/fractals.soT /usr/local/lib/gretl-gtk2/fractals.so libtool: install: /usr/bin/install -c -m 755 .libs/fractals.lai /usr/local/lib/gretl-gtk2/fractals.la libtool: warning: relinking 'garch.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o garch.la garch.lo fcp.lo mod_garch.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/garch.o .libs/fcp.o .libs/mod_garch.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,garch.so -o .libs/garch.so libtool: install: /usr/bin/install -c -m 755 .libs/garch.soT /usr/local/lib/gretl-gtk2/garch.so libtool: install: /usr/bin/install -c -m 755 .libs/garch.lai /usr/local/lib/gretl-gtk2/garch.la libtool: warning: relinking 'johansen.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o johansen.la johansen.lo jrestrict.lo jalpha.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/johansen.o .libs/jrestrict.o .libs/jalpha.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,johansen.so -o .libs/johansen.so libtool: install: /usr/bin/install -c -m 755 .libs/johansen.soT /usr/local/lib/gretl-gtk2/johansen.so libtool: install: /usr/bin/install -c -m 755 .libs/johansen.lai /usr/local/lib/gretl-gtk2/johansen.la libtool: warning: relinking 'kernel.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o kernel.la kernel.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/kernel.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,kernel.so -o .libs/kernel.so libtool: install: /usr/bin/install -c -m 755 .libs/kernel.soT /usr/local/lib/gretl-gtk2/kernel.so libtool: install: /usr/bin/install -c -m 755 .libs/kernel.lai /usr/local/lib/gretl-gtk2/kernel.la libtool: warning: relinking 'nistcheck.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o nistcheck.la nistcheck.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/nistcheck.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,nistcheck.so -o .libs/nistcheck.so libtool: install: /usr/bin/install -c -m 755 .libs/nistcheck.soT /usr/local/lib/gretl-gtk2/nistcheck.so libtool: install: /usr/bin/install -c -m 755 .libs/nistcheck.lai /usr/local/lib/gretl-gtk2/nistcheck.la libtool: warning: relinking 'range-mean.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o range-mean.la range-mean.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/range-mean.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,range-mean.so -o .libs/range-mean.so libtool: install: /usr/bin/install -c -m 755 .libs/range-mean.soT /usr/local/lib/gretl-gtk2/range-mean.so libtool: install: /usr/bin/install -c -m 755 .libs/range-mean.lai /usr/local/lib/gretl-gtk2/range-mean.la libtool: warning: relinking 'stats_tables.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o stats_tables.la stats_tables.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/stats_tables.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,stats_tables.so -o .libs/stats_tables.so libtool: install: /usr/bin/install -c -m 755 .libs/stats_tables.soT /usr/local/lib/gretl-gtk2/stats_tables.so libtool: install: /usr/bin/install -c -m 755 .libs/stats_tables.lai /usr/local/lib/gretl-gtk2/stats_tables.la libtool: warning: relinking 'sysest.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o sysest.la sysest.lo fiml.lo liml.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/sysest.o .libs/fiml.o .libs/liml.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,sysest.so -o .libs/sysest.so libtool: install: /usr/bin/install -c -m 755 .libs/sysest.soT /usr/local/lib/gretl-gtk2/sysest.so libtool: install: /usr/bin/install -c -m 755 .libs/sysest.lai /usr/local/lib/gretl-gtk2/sysest.la libtool: warning: relinking 'urcdist.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o urcdist.la urcdist.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/urcdist.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,urcdist.so -o .libs/urcdist.so libtool: install: /usr/bin/install -c -m 755 .libs/urcdist.soT /usr/local/lib/gretl-gtk2/urcdist.so libtool: install: /usr/bin/install -c -m 755 .libs/urcdist.lai /usr/local/lib/gretl-gtk2/urcdist.la libtool: warning: relinking 'vif.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o vif.la vif.lo ../lib/ libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/vif.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,vif.so -o .libs/vif.so libtool: install: /usr/bin/install -c -m 755 .libs/vif.soT /usr/local/lib/gretl-gtk2/vif.so libtool: install: /usr/bin/install -c -m 755 .libs/vif.lai /usr/local/lib/gretl-gtk2/vif.la libtool: warning: relinking 'poisson.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o poisson.la poisson.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/poisson.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,poisson.so -o .libs/poisson.so libtool: install: /usr/bin/install -c -m 755 .libs/poisson.soT /usr/local/lib/gretl-gtk2/poisson.so libtool: install: /usr/bin/install -c -m 755 .libs/poisson.lai /usr/local/lib/gretl-gtk2/poisson.la libtool: warning: relinking 'duration.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o duration.la duration.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/duration.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,duration.so -o .libs/duration.so libtool: install: /usr/bin/install -c -m 755 .libs/duration.soT /usr/local/lib/gretl-gtk2/duration.so libtool: install: /usr/bin/install -c -m 755 .libs/duration.lai /usr/local/lib/gretl-gtk2/duration.la libtool: warning: relinking 'heckit.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o heckit.la heckit.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/heckit.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,heckit.so -o .libs/heckit.so libtool: install: /usr/bin/install -c -m 755 .libs/heckit.soT /usr/local/lib/gretl-gtk2/heckit.so libtool: install: /usr/bin/install -c -m 755 .libs/heckit.lai /usr/local/lib/gretl-gtk2/heckit.la libtool: warning: relinking 'quantreg.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o quantreg.la quantreg.lo rqfnb.lo rqbr.lo ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/quantreg.o .libs/rqfnb.o .libs/rqbr.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,quantreg.so -o .libs/quantreg.so libtool: install: /usr/bin/install -c -m 755 .libs/quantreg.soT /usr/local/lib/gretl-gtk2/quantreg.so libtool: install: /usr/bin/install -c -m 755 .libs/quantreg.lai /usr/local/lib/gretl-gtk2/quantreg.la libtool: warning: relinking 'interval.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o interval.la interval.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/interval.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,interval.so -o .libs/interval.so libtool: install: /usr/bin/install -c -m 755 .libs/interval.soT /usr/local/lib/gretl-gtk2/interval.so libtool: install: /usr/bin/install -c -m 755 .libs/interval.lai /usr/local/lib/gretl-gtk2/interval.la libtool: warning: relinking 'anova.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o anova.la anova.lo ../lib/ libgretl-1.0.la -lglib-2.0 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/anova.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lgmp -lfftw3 -lcurl -lglib-2.0 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,anova.so -o .libs/anova.so libtool: install: /usr/bin/install -c -m 755 .libs/anova.soT /usr/local/lib/gretl-gtk2/anova.so libtool: install: /usr/bin/install -c -m 755 .libs/anova.lai /usr/local/lib/gretl-gtk2/anova.la libtool: warning: relinking 'mp_ols.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o mp_ols.la mp_ols.lo ../lib/libgretl-1.0.la -lgmp -lmpfr ) libtool: relink: gcc -shared -fPIC -DPIC .libs/mp_ols.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lfftw3 -lcurl -lgmp -lmpfr -fopenmp -fopenmp -pthread -Wl,-soname -Wl,mp_ols.so -o .libs/mp_ols.so libtool: install: /usr/bin/install -c -m 755 .libs/mp_ols.soT /usr/local/lib/gretl-gtk2/mp_ols.so libtool: install: /usr/bin/install -c -m 755 .libs/mp_ols.lai /usr/local/lib/gretl-gtk2/mp_ols.la libtool: warning: relinking 'interpolate.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o interpolate.la interpolate.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/interpolate.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,interpolate.so -o .libs/interpolate.so libtool: install: /usr/bin/install -c -m 755 .libs/interpolate.soT /usr/local/lib/gretl-gtk2/interpolate.so libtool: install: /usr/bin/install -c -m 755 .libs/interpolate.lai /usr/local/lib/gretl-gtk2/interpolate.la libtool: warning: relinking 'biprobit.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o biprobit.la biprobit.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/biprobit.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,biprobit.so -o .libs/biprobit.so libtool: install: /usr/bin/install -c -m 755 .libs/biprobit.soT /usr/local/lib/gretl-gtk2/biprobit.so libtool: install: /usr/bin/install -c -m 755 .libs/biprobit.lai /usr/local/lib/gretl-gtk2/biprobit.la libtool: warning: relinking 'reprobit.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o reprobit.la reprobit.lo ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/reprobit.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,reprobit.so -o .libs/reprobit.so libtool: install: /usr/bin/install -c -m 755 .libs/reprobit.soT /usr/local/lib/gretl-gtk2/reprobit.so libtool: install: /usr/bin/install -c -m 755 .libs/reprobit.lai /usr/local/lib/gretl-gtk2/reprobit.la libtool: warning: relinking 'panurc.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o panurc.la panurc.lo ../lib/libgretl-1.0.la -lglib-2.0 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/panurc.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lgmp -lfftw3 -lcurl -lglib-2.0 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,panurc.so -o .libs/panurc.so libtool: install: /usr/bin/install -c -m 755 .libs/panurc.soT /usr/local/lib/gretl-gtk2/panurc.so libtool: install: /usr/bin/install -c -m 755 .libs/panurc.lai /usr/local/lib/gretl-gtk2/panurc.la libtool: warning: relinking 'arma_x12.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o arma_x12.la arma_x12.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/arma_x12.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,arma_x12.so -o .libs/arma_x12.so libtool: install: /usr/bin/install -c -m 755 .libs/arma_x12.soT /usr/local/lib/gretl-gtk2/arma_x12.so libtool: install: /usr/bin/install -c -m 755 .libs/arma_x12.lai /usr/local/lib/gretl-gtk2/arma_x12.la libtool: warning: relinking 'excel_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o excel_import.la excel_import.lo workbook.lo ms-ole.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/excel_import.o .libs/workbook.o .libs/ms-ole.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,excel_import.so -o .libs/excel_import.so libtool: install: /usr/bin/install -c -m 755 .libs/excel_import.soT /usr/local/lib/gretl-gtk2/excel_import.so libtool: install: /usr/bin/install -c -m 755 .libs/excel_import.lai /usr/local/lib/gretl-gtk2/excel_import.la libtool: warning: relinking 'xlsx_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o xlsx_import.la xlsx_import.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -lxml2 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/xlsx_import.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lglib-2.0 -lgmp -lfftw3 -lcurl -lxml2 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,xlsx_import.so -o .libs/xlsx_import.so libtool: install: /usr/bin/install -c -m 755 .libs/xlsx_import.soT /usr/local/lib/gretl-gtk2/xlsx_import.so libtool: install: /usr/bin/install -c -m 755 .libs/xlsx_import.lai /usr/local/lib/gretl-gtk2/xlsx_import.la libtool: warning: relinking 'gnumeric_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o gnumeric_import.la gnumeric_import.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -lxml2 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/gnumeric_import.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lglib-2.0 -lgmp -lfftw3 -lcurl -lxml2 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,gnumeric_import.so -o .libs/gnumeric_import.so libtool: install: /usr/bin/install -c -m 755 .libs/gnumeric_import.soT /usr/local/lib/gretl-gtk2/gnumeric_import.so libtool: install: /usr/bin/install -c -m 755 .libs/gnumeric_import.lai /usr/local/lib/gretl-gtk2/gnumeric_import.la libtool: warning: relinking 'leverage.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o leverage.la leverage.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/leverage.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,leverage.so -o .libs/leverage.so libtool: install: /usr/bin/install -c -m 755 .libs/leverage.soT /usr/local/lib/gretl-gtk2/leverage.so libtool: install: /usr/bin/install -c -m 755 .libs/leverage.lai /usr/local/lib/gretl-gtk2/leverage.la libtool: warning: relinking 'mailer.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o mailer.la mailer.lo encode.lo md5c.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/mailer.o .libs/encode.o .libs/md5c.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,mailer.so -o .libs/mailer.so libtool: install: /usr/bin/install -c -m 755 .libs/mailer.soT /usr/local/lib/gretl-gtk2/mailer.so libtool: install: /usr/bin/install -c -m 755 .libs/mailer.lai /usr/local/lib/gretl-gtk2/mailer.la libtool: warning: relinking 'ods_import.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o ods_import.la ods_import.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -lxml2 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/ods_import.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lglib-2.0 -lgmp -lfftw3 -lcurl -lxml2 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,ods_import.so -o .libs/ods_import.so libtool: install: /usr/bin/install -c -m 755 .libs/ods_import.soT /usr/local/lib/gretl-gtk2/ods_import.so libtool: install: /usr/bin/install -c -m 755 .libs/ods_import.lai /usr/local/lib/gretl-gtk2/ods_import.la libtool: warning: relinking 'pca.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o pca.la pca.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la -llapack -lblas -lgfortran ) libtool: relink: gcc -shared -fPIC -DPIC .libs/pca.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -llapack -lblas -lgfortran -fopenmp -fopenmp -pthread -Wl,-soname -Wl,pca.so -o .libs/pca.so libtool: install: /usr/bin/install -c -m 755 .libs/pca.soT /usr/local/lib/gretl-gtk2/pca.so libtool: install: /usr/bin/install -c -m 755 .libs/pca.lai /usr/local/lib/gretl-gtk2/pca.la libtool: install: /usr/bin/install -c -m 755 .libs/progress_bar.so /usr/local/lib/gretl-gtk2/progress_bar.so libtool: install: /usr/bin/install -c -m 755 .libs/progress_bar.lai /usr/local/lib/gretl-gtk2/progress_bar.la libtool: warning: relinking 'tramo-x12a.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o tramo-x12a.la tramo-x12a.lo tramo_options.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/tramo-x12a.o .libs/tramo_options.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,tramo-x12a.so -o .libs/tramo-x12a.so libtool: install: /usr/bin/install -c -m 755 .libs/tramo-x12a.soT /usr/local/lib/gretl-gtk2/tramo-x12a.so libtool: install: /usr/bin/install -c -m 755 .libs/tramo-x12a.lai /usr/local/lib/gretl-gtk2/tramo-x12a.la libtool: warning: relinking 'mailer.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o mailer.la mailer.lo encode.lo md5c.lo -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/mailer.o .libs/encode.o .libs/md5c.o -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lfontconfig -L/usr/lib/x86_64-linux-gnu -lfreetype -L/usr/local/lib -lgretl-1.0 -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,mailer.so -o .libs/mailer.so libtool: install: /usr/bin/install -c -m 755 .libs/mailer.soT /usr/local/lib/gretl-gtk2/mailer.so libtool: install: /usr/bin/install -c -m 755 .libs/mailer.lai /usr/local/lib/gretl-gtk2/mailer.la libtool: warning: relinking 'gretlzip.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o gretlzip.la gretlzip.lo zfileio.lo zsystem.lo zipfile.lo zipmain.lo zipwork.lo -lglib-2.0 -lz ../lib/libgretl-1.0.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/gretlzip.o .libs/zfileio.o .libs/zsystem.o .libs/zipfile.o .libs/zipmain.o .libs/zipwork.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lglib-2.0 -lgmp -lfftw3 -lcurl -fopenmp -fopenmp -pthread -Wl,-soname -Wl,gretlzip.so -o .libs/gretlzip.so libtool: install: /usr/bin/install -c -m 755 .libs/gretlzip.soT /usr/local/lib/gretl-gtk2/gretlzip.so libtool: install: /usr/bin/install -c -m 755 .libs/gretlzip.lai /usr/local/lib/gretl-gtk2/gretlzip.la libtool: warning: relinking 'json_get.la' libtool: install: (cd /home/clive/gretl-2015d/plugin; /bin/bash "/home/clive/gretl-2015d/libtool" --mode=relink gcc -fopenmp -module -avoid-version -rpath /usr/local/lib/gretl-gtk2 -o json_get.la json_get.lo ../lib/libgretl-1.0.la -ljson-glib-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 ) libtool: relink: gcc -shared -fPIC -DPIC .libs/json_get.o -L/usr/local/lib -lgretl-1.0 -L/usr/lib/x86_64-linux-gnu -llapack -lblas -lgfortran -lm -ldl -lz -lxml2 -lgmp -lfftw3 -lcurl -ljson-glib-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -fopenmp -fopenmp -pthread -Wl,-soname -Wl,json_get.so -o .libs/json_get.so libtool: install: /usr/bin/install -c -m 755 .libs/json_get.soT /usr/local/lib/gretl-gtk2/json_get.so libtool: install: /usr/bin/install -c -m 755 .libs/json_get.lai /usr/local/lib/gretl-gtk2/json_get.la libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib/gretl-gtk2 ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib/gretl-gtk2 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /usr/bin/install -c -m 644 ../plugin/data/urcdata.bin /usr/local/lib/gretl-gtk2/data /usr/bin/install -c -m 644 ../plugin/data/dwdata.gz /usr/local/lib/gretl-gtk2/data make[1]: Leaving directory '/home/clive/gretl-2015d/plugin' make[1]: Entering directory '/home/clive/gretl-2015d/po' ../tools/mkinstalldirs /usr/local/share installing bg.gmo as /usr/local/share/locale/bg/LC_MESSAGES/gretl.mo installing ca.gmo as /usr/local/share/locale/ca/LC_MESSAGES/gretl.mo installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/gretl.mo installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/gretl.mo installing el.gmo as /usr/local/share/locale/el/LC_MESSAGES/gretl.mo installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/gretl.mo installing eu.gmo as /usr/local/share/locale/eu/LC_MESSAGES/gretl.mo installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/gretl.mo installing gl.gmo as /usr/local/share/locale/gl/LC_MESSAGES/gretl.mo installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/gretl.mo installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/gretl.mo installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/gretl.mo installing tr.gmo as /usr/local/share/locale/tr/LC_MESSAGES/gretl.mo installing pt.gmo as /usr/local/share/locale/pt/LC_MESSAGES/gretl.mo installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/gretl.mo installing ro.gmo as /usr/local/share/locale/ro/LC_MESSAGES/gretl.mo installing ru.gmo as /usr/local/share/locale/ru/LC_MESSAGES/gretl.mo installing sq.gmo as /usr/local/share/locale/sq/LC_MESSAGES/gretl.mo installing zh_TW.gmo as /usr/local/share/locale/zh_TW/LC_MESSAGES/gretl.mo if test "gretl" = "gettext"; then \ ../tools/mkinstalldirs /usr/local/share/gettext/po; \ for file in Makefile.in.in Makevars remove-potcdate.sin ; do \ /usr/bin/install -c -m 644 ./$file \ /usr/local/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/home/clive/gretl-2015d/po' make[1]: Entering directory '/home/clive/gretl-2015d/share' ../tools/mkinstalldirs /usr/local/share/gretl ../tools/mkinstalldirs /usr/local/share/gretl/data ../tools/mkinstalldirs /usr/local/share/gretl/data/greene ../tools/mkinstalldirs /usr/local/share/gretl/data/misc ../tools/mkinstalldirs /usr/local/share/gretl/data/nist ../tools/mkinstalldirs /usr/local/share/gretl/data/plotbars ../tools/mkinstalldirs /usr/local/share/gretl/scripts ../tools/mkinstalldirs /usr/local/share/gretl/scripts/misc ../tools/mkinstalldirs /usr/local/share/gretl/db ../tools/mkinstalldirs /usr/local/share/gretl/functions ../tools/mkinstalldirs /usr/local/share/gretl/fonts for f in ../share/data/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data ; done cp -fp ../share/data/descriptions /usr/local/share/gretl/data cp -fp ../share/data/gretldata.dtd /usr/local/share/gretl/data cp -fp ../share/data/plotbars/nber.txt /usr/local/share/gretl/data/plotbars for f in ../share/data/greene/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data/greene ; done cp -fp ../share/data/greene/wg_descriptions /usr/local/share/gretl/data/greene for f in ../share/data/misc/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data/misc ; done cp -fp ../share/data/misc/descriptions /usr/local/share/gretl/data/misc for f in ../tests/*.dat ; do \ cp -fp $f /usr/local/share/gretl/data/nist ; done for f in ../share/scripts/*.inp ; do \ cp -fp $f /usr/local/share/gretl/scripts ; done cp -fp ../share/scripts/ps_descriptions /usr/local/share/gretl/scripts cp -fp ../share/scripts/wg_ps_descriptions /usr/local/share/gretl/scripts for f in ../share/scripts/misc/*.inp ; do \ cp -fp $f /usr/local/share/gretl/scripts/misc ; done cp -fp ../share/scripts/misc/ps_descriptions /usr/local/share/gretl/scripts/misc cp -fp ../share/functions/gretlfunc.dtd /usr/local/share/gretl/functions cp -fp ../share/functions/criteria.gfn /usr/local/share/gretl/functions cp -fp ../share/functions/packages.xml /usr/local/share/gretl/functions for f in ../share/fonts/*.ttf ; do \ cp -fp $f /usr/local/share/gretl/fonts ; done ../tools/mkinstalldirs /usr/local/share/gretl ../tools/mkinstalldirs /usr/local/share/gretl/doc ../tools/mkinstalldirs /usr/local/share/gretl/helpfigs for f in gretlgui.hlp gretlcmd.hlp gretlcli.hlp gretlgui.hlp.es gretlcmd.hlp.es gretlcli.hlp.es gretlgui.hlp.it gretlcmd.hlp.it gretlcli.hlp.it gretlgui.hlp.pt gretlcmd.hlp.pt gretlcli.hlp.pt genrcli.hlp genrgui.hlp genrcli.hlp.it genrgui.hlp.it genrcli.hlp.pt genrgui.hlp.pt gretlhelp.refs ; do \ if test -f ../share/$f ; then \ cp -fp ../share/$f /usr/local/share/gretl ; fi ; done for f in ../share/texfigs/*.png ; do \ cp -fp $f /usr/local/share/gretl/helpfigs ; done for f in ../doc/tex/gretl-ref.pdf ../doc/tex/gretl-guide.pdf ; do \ if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done for f in ../doc/tex/gretl-ref-a4.pdf ../doc/tex/gretl-guide-a4.pdf ; do \ if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done cp -fp ../COPYING /usr/local/share/gretl/COPYING make -C bcih install make[2]: Entering directory '/home/clive/gretl-2015d/share/bcih' cp -fp fedstl.bin /usr/local/share/gretl/db/fedstl.bin cp -fp ../../share/bcih/fedstl.idx /usr/local/share/gretl/db/fedstl.idx make[2]: Leaving directory '/home/clive/gretl-2015d/share/bcih' make[1]: Leaving directory '/home/clive/gretl-2015d/share' make[1]: Entering directory '/home/clive/gretl-2015d/xdg' xdg-desktop-menu install gretl.desktop --novendor xdg-mime install ../xdg/gretl.xml --novendor xdg-icon-resource install --context mimetypes --size 32 ../xdg/gretl-data-icon.png application-gretl.data xdg-icon-resource install --context mimetypes --size 32 ../xdg/gretl-bindata-icon.png application-gretl.bindata xdg-icon-resource install --context mimetypes --size 32 ../xdg/gretl-session-icon.png application-gretl.session xdg-icon-resource install --context mimetypes --size 32 ../xdg/gretl-script-icon.png text-gretl.script xdg-icon-resource install --context apps --size 32 ../xdg/32/gretl.png --novendor xdg-icon-resource install --context apps --size 48 ../xdg/48/gretl.png --novendor xdg-icon-resource install --context apps --size 64 ../xdg/64/gretl.png --novendor make[1]: Leaving directory '/home/clive/gretl-2015d/xdg' make -C share install make[1]: Entering directory '/home/clive/gretl-2015d/share' ../tools/mkinstalldirs /usr/local/share/gretl ../tools/mkinstalldirs /usr/local/share/gretl/data ../tools/mkinstalldirs /usr/local/share/gretl/data/greene ../tools/mkinstalldirs /usr/local/share/gretl/data/misc ../tools/mkinstalldirs /usr/local/share/gretl/data/nist ../tools/mkinstalldirs /usr/local/share/gretl/data/plotbars ../tools/mkinstalldirs /usr/local/share/gretl/scripts ../tools/mkinstalldirs /usr/local/share/gretl/scripts/misc ../tools/mkinstalldirs /usr/local/share/gretl/db ../tools/mkinstalldirs /usr/local/share/gretl/functions ../tools/mkinstalldirs /usr/local/share/gretl/fonts for f in ../share/data/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data ; done cp -fp ../share/data/descriptions /usr/local/share/gretl/data cp -fp ../share/data/gretldata.dtd /usr/local/share/gretl/data cp -fp ../share/data/plotbars/nber.txt /usr/local/share/gretl/data/plotbars for f in ../share/data/greene/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data/greene ; done cp -fp ../share/data/greene/wg_descriptions /usr/local/share/gretl/data/greene for f in ../share/data/misc/*.gdt ; do \ cp -fp $f /usr/local/share/gretl/data/misc ; done cp -fp ../share/data/misc/descriptions /usr/local/share/gretl/data/misc for f in ../tests/*.dat ; do \ cp -fp $f /usr/local/share/gretl/data/nist ; done for f in ../share/scripts/*.inp ; do \ cp -fp $f /usr/local/share/gretl/scripts ; done cp -fp ../share/scripts/ps_descriptions /usr/local/share/gretl/scripts cp -fp ../share/scripts/wg_ps_descriptions /usr/local/share/gretl/scripts for f in ../share/scripts/misc/*.inp ; do \ cp -fp $f /usr/local/share/gretl/scripts/misc ; done cp -fp ../share/scripts/misc/ps_descriptions /usr/local/share/gretl/scripts/misc cp -fp ../share/functions/gretlfunc.dtd /usr/local/share/gretl/functions cp -fp ../share/functions/criteria.gfn /usr/local/share/gretl/functions cp -fp ../share/functions/packages.xml /usr/local/share/gretl/functions for f in ../share/fonts/*.ttf ; do \ cp -fp $f /usr/local/share/gretl/fonts ; done ../tools/mkinstalldirs /usr/local/share/gretl ../tools/mkinstalldirs /usr/local/share/gretl/doc ../tools/mkinstalldirs /usr/local/share/gretl/helpfigs for f in gretlgui.hlp gretlcmd.hlp gretlcli.hlp gretlgui.hlp.es gretlcmd.hlp.es gretlcli.hlp.es gretlgui.hlp.it gretlcmd.hlp.it gretlcli.hlp.it gretlgui.hlp.pt gretlcmd.hlp.pt gretlcli.hlp.pt genrcli.hlp genrgui.hlp genrcli.hlp.it genrgui.hlp.it genrcli.hlp.pt genrgui.hlp.pt gretlhelp.refs ; do \ if test -f ../share/$f ; then \ cp -fp ../share/$f /usr/local/share/gretl ; fi ; done for f in ../share/texfigs/*.png ; do \ cp -fp $f /usr/local/share/gretl/helpfigs ; done for f in ../doc/tex/gretl-ref.pdf ../doc/tex/gretl-guide.pdf ; do \ if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done for f in ../doc/tex/gretl-ref-a4.pdf ../doc/tex/gretl-guide-a4.pdf ; do \ if test -f $f ; then cp -fp $f /usr/local/share/gretl/doc ; fi ; done cp -fp ../COPYING /usr/local/share/gretl/COPYING make -C bcih install make[2]: Entering directory '/home/clive/gretl-2015d/share/bcih' cp -fp fedstl.bin /usr/local/share/gretl/db/fedstl.bin cp -fp ../../share/bcih/fedstl.idx /usr/local/share/gretl/db/fedstl.idx make[2]: Leaving directory '/home/clive/gretl-2015d/share/bcih' make[1]: Leaving directory '/home/clive/gretl-2015d/share' ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Then: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ clive@clivubu:~/gretl-2015d$ make pdfdocs make -C make: option requires an argument -- 'C' Usage: make [options] [target] ... Options: -b, -m Ignored for compatibility. -B, --always-make Unconditionally make all targets. -C DIRECTORY, --directory=DIRECTORY Change to DIRECTORY before doing anything. -d Print lots of debugging information. --debug[=FLAGS] Print various types of debugging information. -e, --environment-overrides Environment variables override makefiles. --eval=STRING Evaluate STRING as a makefile statement. -f FILE, --file=FILE, --makefile=FILE Read FILE as a makefile. -h, --help Print this message and exit. -i, --ignore-errors Ignore errors from recipes. -I DIRECTORY, --include-dir=DIRECTORY Search DIRECTORY for included makefiles. -j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg. -k, --keep-going Keep going when some targets can't be made. -l [N], --load-average[=N], --max-load[=N] Don't start multiple jobs unless load is below N. -L, --check-symlink-times Use the latest mtime between symlinks and target. -n, --just-print, --dry-run, --recon Don't actually run any recipe; just print them. -o FILE, --old-file=FILE, --assume-old=FILE Consider FILE to be very old and don't remake it. -O[TYPE], --output-sync[=TYPE] Synchronize output of parallel jobs by TYPE. -p, --print-data-base Print make's internal database. -q, --question Run no recipe; exit status says if up to date. -r, --no-builtin-rules Disable the built-in implicit rules. -R, --no-builtin-variables Disable the built-in variable settings. -s, --silent, --quiet Don't echo recipes. -S, --no-keep-going, --stop Turns off -k. -t, --touch Touch targets instead of remaking them. --trace Print tracing information. -v, --version Print the version number of make and exit. -w, --print-directory Print the current directory. --no-print-directory Turn off -w, even if it was turned on implicitly. -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE Consider FILE to be infinitely new. --warn-undefined-variables Warn when an undefined variable is referenced. This program built for x86_64-pc-linux-gnu Report bugs to <bug-make(a)gnu.org&gt; Makefile:68: recipe for target 'pdfdocs' failed make: *** [pdfdocs] Error 2 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ I hope that helps, Clive On 25 October 2015 at 01:56, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Oleg, You're right. It's something I noticed after the fact. C On 25 October 2015 at 20:05, <oleg_komashko(a)ukr.net&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, Okay, fine. I still get this, however: ---------------------------------------------------------------------------------------------------------------------------------------------------- clive@clivubu:~/gretl-2015d$ ./configure --prefix=/usr/local --enable-quiet-build --enable-openmp configuring for gretl 2015d (library version 15.0.0) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking whether make sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c checking for a thread-safe mkdir -p... /bin/mkdir -p checking for a sed that does not truncate output... /bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... no checking for mawk... mawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether ln -s works... yes checking for sin in -lm... yes checking for fopen in -lc... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking fnmatch.h usability... yes checking fnmatch.h presence... yes checking for fnmatch.h... yes checking fenv.h usability... yes checking fenv.h presence... yes checking for fenv.h... yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking libproc.h usability... no checking libproc.h presence... no checking for libproc.h... no checking sys/proc_info.h usability... no checking sys/proc_info.h presence... no checking for sys/proc_info.h... no checking for an ANSI C-conforming const... yes checking for long double with more range or precision than double... yes checking for vasprintf... yes checking for posix_memalign... yes checking size of int... 4 checking return type of signal handlers... void checking whether byte ordering is bigendian... no checking whether to use SSE2... yes checking whether to use AVX... yes checking whether to use OpenMP... yes checking immintrin.h usability... yes checking immintrin.h presence... yes checking for immintrin.h... yes checking for mpicc... no checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for struct sockaddr_in... yes checking for struct in_addr... yes checking readline/readline.h usability... yes checking readline/readline.h presence... yes checking for readline/readline.h... yes checking for tgetent in -lncurses... yes checking for readline in -lreadline... yes checking for rl_completion_matches in -lreadline... yes checking for xdg-mime... yes checking for mmap... yes checking for gzopen in -lz... yes checking for GMP - version >= 4.0.1... yes checking for MPFR - version >= 2.2.0... yes checking for libgfortran... checking for _gfortran_abort in -lgfortran... yes checking for LAPACK... yes checking for dgejsv_ in -llapack... yes checking for gnuplot... yes checking for gnuplot >= 4.4.0 with PNG support... yes checking for pdflatex... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for FFTW... yes checking for CURL... yes checking for GLIB... yes checking for GLIB28... yes checking for JSON_GLIB... yes checking for GTK3... no GTK 3 >= 3.0.1 not found checking for GTK2... yes checking for GTKSPINNER... yes checking for GTKSOURCEVIEW... yes checking for GDK_PIXBUF... yes checking for XML... yes checking for RLIB... yes checking whether CC supports -Wno-deprecated-declarations... yes configure: creating ./config.status config.status: creating Makefile config.status: creating gretl_sh config.status: creating gretl.pc config.status: creating gui2/Makefile config.status: creating gui2/debug config.status: creating xdg/gretl.desktop config.status: creating xdg/Makefile config.status: creating cli/Makefile config.status: creating cli/debug config.status: creating lib/Makefile config.status: creating plugin/Makefile config.status: creating po/Makefile.in config.status: creating share/Makefile config.status: creating share/bcih/Makefile config.status: creating tests/Makefile config.status: creating extra/Makefile config.status: creating osx/Makefile config.status: creating osx/gretl.sh config.status: creating osx/fixlinks.sh config.status: creating osx/Info.plist config.status: creating redhat/gretl.spec config.status: creating utils/emacs/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing libtool commands configure: creating ./config.status config.status: creating Makefile config.status: creating gretl_sh config.status: creating gretl.pc config.status: creating gui2/Makefile config.status: creating gui2/debug config.status: creating xdg/gretl.desktop config.status: creating xdg/Makefile config.status: creating cli/Makefile config.status: creating cli/debug config.status: creating lib/Makefile config.status: creating plugin/Makefile config.status: creating po/Makefile.in config.status: creating share/Makefile config.status: creating share/bcih/Makefile config.status: creating tests/Makefile config.status: creating extra/Makefile config.status: creating osx/Makefile config.status: creating osx/gretl.sh config.status: creating osx/fixlinks.sh config.status: creating osx/Info.plist config.status: creating redhat/gretl.spec config.status: creating utils/emacs/Makefile config.status: creating doc/gretl.sty config.status: creating doc/gretl-lite.sty config.status: creating config.h config.status: config.h is unchanged config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing libtool commands Configuration: Installation path: /usr/local Use readline library: yes Use gnuplot for graphs: yes Use pdflatex for typesetting: yes Use libgsf for zip/unzip: no MPFR support: yes sse2 support for RNG: yes OpenMP support: yes MPI support: no AVX support for arithmetic: yes Build with GTK version: 2.0 Build gretl documentation: no Use Lucida fonts: no Build message catalogs: yes Build gretl addons: no X-12-ARIMA support: yes TRAMO/SEATS support: yes libR support: yes ODBC support: no JSON parsing support: yes Experimental audio support: no Use xdg-utils in installation: if DESTDIR not set LAPACK libraries: -llapack -lblas -lgfortran Now type 'make' to build gretl. clive@clivubu:~/gretl-2015d$ make -j3 ./builddate make -C po make -C xdg build.h is current make -C lib make[1]: Entering directory '/home/clive/gretl-2015d/po' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/po' make[1]: Entering directory '/home/clive/gretl-2015d/xdg' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/xdg' make[1]: Entering directory '/home/clive/gretl-2015d/lib' LD libgretl-1.0.la make[1]: Leaving directory '/home/clive/gretl-2015d/lib' make -C cli make -C gui2 make -C plugin make[1]: Entering directory '/home/clive/gretl-2015d/cli' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/cli' make -C share make[1]: Entering directory '/home/clive/gretl-2015d/share' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/share' make[1]: Entering directory '/home/clive/gretl-2015d/plugin' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/clive/gretl-2015d/plugin' make[1]: Entering directory '/home/clive/gretl-2015d/gui2' ./mklang > gretl.lang make[1]: Leaving directory '/home/clive/gretl-2015d/gui2' clive@clivubu:~/gretl-2015d$ make pdfdocs make -C make: option requires an argument -- 'C' Usage: make [options] [target] ... Options: -b, -m Ignored for compatibility. -B, --always-make Unconditionally make all targets. -C DIRECTORY, --directory=DIRECTORY Change to DIRECTORY before doing anything. -d Print lots of debugging information. --debug[=FLAGS] Print various types of debugging information. -e, --environment-overrides Environment variables override makefiles. --eval=STRING Evaluate STRING as a makefile statement. -f FILE, --file=FILE, --makefile=FILE Read FILE as a makefile. -h, --help Print this message and exit. -i, --ignore-errors Ignore errors from recipes. -I DIRECTORY, --include-dir=DIRECTORY Search DIRECTORY for included makefiles. -j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg. -k, --keep-going Keep going when some targets can't be made. -l [N], --load-average[=N], --max-load[=N] Don't start multiple jobs unless load is below N. -L, --check-symlink-times Use the latest mtime between symlinks and target. -n, --just-print, --dry-run, --recon Don't actually run any recipe; just print them. -o FILE, --old-file=FILE, --assume-old=FILE Consider FILE to be very old and don't remake it. -O[TYPE], --output-sync[=TYPE] Synchronize output of parallel jobs by TYPE. -p, --print-data-base Print make's internal database. -q, --question Run no recipe; exit status says if up to date. -r, --no-builtin-rules Disable the built-in implicit rules. -R, --no-builtin-variables Disable the built-in variable settings. -s, --silent, --quiet Don't echo recipes. -S, --no-keep-going, --stop Turns off -k. -t, --touch Touch targets instead of remaking them. --trace Print tracing information. -v, --version Print the version number of make and exit. -w, --print-directory Print the current directory. --no-print-directory Turn off -w, even if it was turned on implicitly. -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE Consider FILE to be infinitely new. --warn-undefined-variables Warn when an undefined variable is referenced. This program built for x86_64-pc-linux-gnu Report bugs to <bug-make(a)gnu.org&gt; Makefile:68: recipe for target 'pdfdocs' failed make: *** [pdfdocs] Error 2 ---------------------------------------------------------------------------------------------------------------------------------------------------- Thoughts? C On 25 October 2015 at 21:05, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Dear Allin, Judging by this extract clive@clivubu: ~/gretl-git$  make clive@clivubu: ~/gretl-2015d$  sudo make install clive@clivubu: ~/gretl-2015d$  make pdfdocs Clive tries to compile release and git with mixing options. A am not sure, whether there is an installed version docs or docsless Oleh 25 жовтня 2015, 23:36:08, від "Allin Cottrell" < cottrell(a)wfu.edu >: On Sun, 25 Oct 2015, Clive Nicholas wrote: Note: you didn't add --enable-build-doc. So we see... [...] [...] And therefore... the resulting failure should not be a surprise. Allin _______________________________________________ Gretl-users mailing list Gretl-users(a)lists.wfu.edu http://lists.wfu.edu/mailman/listinfo/gretl-users

On Sun, 25 Oct 2015, Clive Nicholas wrote: Clive, we (Oleh and I) are telling you: (a) "make pdfdocs" will not work unless you have given the option --enable-build-doc to the configure script, but (b) the latter option is valid only when you are building from the git source, and not with a regular release source package such as gretl-2015d.tar.xz. In other words, if you want to build the docs you _must_ use the git source and you _must_ add --enable-build-doc when configuring. In addition you _must not_ invoke "sudo" when doing "git pull" or running the configure script. Allin

Okay, after I do this, successfully: clive@clivubu:~/gretl-git$ sudo git clone ssh:// stonebridgespur(a)git.code.sf.net/p/gretl/git gretl-git [sudo] password for clive: Cloning into 'gretl-git'... Password: remote: Counting objects: 137418, done. remote: Compressing objects: 100% (30143/30143), done. remote: Total 137418 (delta 109830), reused 134008 (delta 106823) Receiving objects: 100% (137418/137418), 172.73 MiB | 713.00 KiB/s, done. Resolving deltas: 100% (109830/109830), done. Checking connectivity... done. I get this: clive@clivubu:~/gretl-git$ ./configure --prefix=/usr/local --enable-quiet-build --enable-openmp --enable-build-doc ./configure: line 2338: config.log: Permission denied ./configure: line 2348: config.log: Permission denied Which is why I have to run: clive@clivubu:~/gretl-git$ sudo ./configure --prefix=/usr/local --enable-quiet-build --enable-openmp --enable-build-doc [...] Configuration: Installation path: /usr/local Use readline library: yes Use gnuplot for graphs: yes Use pdflatex for typesetting: yes Use libgsf for zip/unzip: no MPFR support: yes sse2 support for RNG: yes OpenMP support: yes MPI support: no AVX support for arithmetic: yes Build with GTK version: 2.0 Build gretl documentation: yes Use Lucida fonts: no Build message catalogs: yes Build gretl addons: no X-12-ARIMA support: yes TRAMO/SEATS support: yes libR support: yes ODBC support: no JSON parsing support: yes Experimental audio support: no Use xdg-utils in installation: if DESTDIR not set LAPACK libraries: -llapack -lblas -lgfortran Now type 'make' to build gretl. You can also do 'make pdfdocs' to build the PDF documentation. And then... clive@clivubu:~/gretl-git$ make ./builddate Can't write to build.h Makefile:103: recipe for target 'buildstamp' failed make: *** [buildstamp] Error 1 I hope that makes things clearer. Clive On 25 October 2015 at 23:57, Clive Nicholas <clivelists(a)googlemail.com&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, Thanks for this, but the outcome is weird after -make-. Essentially, after executing everything (it seems), it throws up an endless loop of LaTeX errors, which is odd, as I have TeX Live 2015 which works fine for me. I don't even get to -make pdfdocs-. Clive On 26 October 2015 at 00:56, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Jack, Thanks for your reply! I was hoping you had the key to this, I really did. After running: sudo apt-get install texlive-latex-extra texlive-fonts-recommended texlive-fonts-extra and then: cd gretl-git make pdfdocs most of it ran well, until I started running into a blizzard of warnings and the odd errors, culminating in this: [...] Package natbib Warning: There were undefined citations. (./gretl-ref.aux (./cmdref.aux) (./funcref.aux) (./operators.aux) (./comments.aux) (./optarg.aux) (./reftables.aux) (./biblio.aux)) Package rerunfilecheck Warning: File `gretl-ref.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. )pdfTeX warning (dest): name{func-dolnobs} has been referenced but does not ex ist, replaced by a fixed one pdfTeX warning (dest): name{func-dolpvalue} has been referenced but does not ex ist, replaced by a fixed one </usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmbx10.pfb></usr/ share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmbx9.pfb></usr/share/t exlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb></usr/share/texlive /texmf-dist/fonts/type1/public/amsfonts/cmextra/cmex9.pfb></usr/share/texlive/t exmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/share/texlive/texmf-d ist/fonts/type1/public/amsfonts/cm/cmmi5.pfb></usr/share/texlive/texmf-dist/fon ts/type1/public/amsfonts/cm/cmmi6.pfb></usr/share/texlive/texmf-dist/fonts/type 1/public/amsfonts/cm/cmmi7.pfb></usr/share/texlive/texmf-dist/fonts/type1/publi c/amsfonts/cm/cmmi9.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfo nts/cm/cmr10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/ cmr6.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr7.pfb hare/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/share/tex live/texmf-dist/fonts/type1/public/amsfonts/cm/cmsl10.pfb></usr/share/texlive/t exmf-dist/fonts/type1/public/amsfonts/cm/cmss10.pfb></usr/share/texlive/texmf-d ist/fonts/type1/public/amsfonts/cm/cmss12.pfb></usr/share/texlive/texmf-dist/fo nts/type1/public/amsfonts/cm/cmss17.pfb></usr/share/texlive/texmf-dist/fonts/ty pe1/public/amsfonts/cm/cmss8.pfb></usr/share/texlive/texmf-dist/fonts/type1/pub lic/amsfonts/cm/cmsy10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/am sfonts/cm/cmsy7.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/ cm/cmti10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmt i9.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmtt10.pfb share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmtt9.pfb> Output written on gretl-ref.pdf (172 pages, 942022 bytes). Transcript written on gretl-ref.log. Makefile:103: recipe for target 'gretl-ref.pdf' failed make[2]: *** [gretl-ref.pdf] Error 1 make[2]: Leaving directory '/home/clive/gretl-git/doc/tex' Makefile:11: recipe for target 'tex' failed make[1]: *** [tex] Error 2 make[1]: Leaving directory '/home/clive/gretl-git/doc' Makefile:68: recipe for target 'pdfdocs' failed make: *** [pdfdocs] Error 2 I'm truly sorry if all of you watching on are frustrated and irritated at having had to read all this crap from the past few days and I truly thank you for all the help and time you've devoted to my issues _pro bono_. I just want a resolution and I think I'm getting there! I'll now proceed to try Helio's solution, as promised. Ta, C On 26 October 2015 at 07:24, Riccardo (Jack) Lucchetti < r.lucchetti(a)univpm.it&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Allin, You were right! Running -make pdfdocs- did do the trick. I am now the proud owner of a copy of -gretl- 2015e-git. Thanks for your help and your patience, before it nearly ran out. Perhaps the final steps that worked could be incorporated into the gretl git basics page: sudo rm -rf gretl-git git clone git://git.code.sf.net/p/gretl/git gretl-git cd gretl-git ./configure --enable-quiet-build --enable-openmp --enable-build-doc make make pdfdocs make pdfdocs # again, if necessary cli/gretlcli -v sudo make install sudo /sbin/ldconfig gretl & I don't know if there needs to be a build-dependencies step in there, but at least this will prevent others from going through the rubbish I've just had to go through in order to get the finished product. Thanks once again to you Allin, Oleh, Helio and Jack for your sterling help. Yours, Clive On 26 October 2015 at 22:14, Allin Cottrell <cottrell(a)wfu.edu&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Helio, I was just writing a message saying that I've finally reached a solution with all of your help, having built the entire guide. :) C On 26 October 2015 at 22:55, Hélio Guilherme <helioxentric(a)gmail.com&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson

Thanks Helio, I'll concentrate on Allin's code and then get to yours after! Clive On 26 October 2015 at 00:59, Hélio Guilherme <helioxentric(a)gmail.com&gt; wrote: -- Clive Nicholas "My colleagues in the social sciences talk a great deal about methodology. I prefer to call it style." -- Freeman J. Dyson